Specyfikacja sprzętowa
|
| Technologia |
| Standard |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control and Back-pressure
IEEE 802.3af Power Over Ethernet |
| Przetwarzanie |
Architektura store and forward |
| Interfejs |
|
| Połączenia |
10/100TX: RJ-45
Power: 6-pin Terminal Block |
| Kabel sieciowy |
10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable,
EIA/TIA-568 100-ohm(100m)
100Base-TX: 4-pair UTP/STP Cat. 5 cable,
EIA/TIA-568 100-ohm(100m) |
| Wydajność |
|
| Technologia Switcha |
Technologia Store and Forward o przepustowości 3.2GBbps |
| Przepustowość systemu |
1.78Mpps |
| Bufer podręczny |
Zintegrowany 1Mbits współdzielony |
| Transfer |
14,880pps for Ethernet and 148,800 for Fast Ethernet and transfer packet size from 64 to 1522Bytes |
| QoS |
Meets IEEE802.1p, per port provides 4 priority queues with WRR packet forwarding mechanism |
| MAC Address |
2000 MAC Adres |
| Technologia PoE |
End-Span wiring architecture Provides PD classification detection, class ID 0~3 follow IEEE802.3af standard, and class 4 for 30W High power deliver procedures.
Pin assignment: V+ (RJ-45 Pin 4,5), V- (RJ-45 Pin 7,8),
TX (RJ-45 Pin 1,2), RX (RJ-45 Pin 3,6)
Protection: Over-current protection by PD class |
| Kontrola budżetu zasilania |
Supports IEEE802.3af PD classification mechanism for 15.4W and class ID number 4 for IEEE802.3at High-power pre-standard 30W
The maximum DC power delivery on each PoE port is 12.9W@DC 24V input or 30W @ DC 55V input with maximum 0.615A current output. |
| Zarządzanie |
|
| Interfejs zarządzania |
Przeglądarka WEB, JetView |
| Aktualizacja Firmware |
TFTP, Local file and JetView |
| Quality of Service |
Quality of Service determined by port, Tag and IPv4 Type of Service |
| Clas of Service |
IEEE802.1p class of service, with 4 priority queues |
| Redundantna Sieć |
Supports Rapid Super Ring function for network redundancy with 5ms network recovery time. JetNet 3706 also conforms with IEEE802.1D 2004 edition for RSTP and STP standand protocoes |
| Kontrola zasilania |
The control mode supports IEEE802.3af standard, Manual and Ultra mode for 30W Hi-power. The maximum DC power delivery on each PoE port is 12.9W@DC 24V input or 30W @ DC55V input |
| Grafik kontroli PoE |
Each PoE port can be activated and powered scheduling with different rule. It supports weekly scheduling by hourly basis |
| Zasilanie |
|
| Zasilacz |
Input Voltage:
48VDC or -48VDC, dual inputs in terminal block connection
AC /DC Power Adapter 48VDC/ 1.6A (option)
Power input connector:
Two Power inputs via the Terminal Block (12 ~24 AWG power cable)
One DC jack for AC/D power adapter.
Reverse Polarity Protection: Present |
| Zużycie prądu |
8Watt @ 48V (Maximum) bez obciążenia PD
|
| PoEPort |
Port 1~4
Per port 15.4W ability.
RJ-45 pin assignment: TX (3,6), RX (1,2), V+ (4,5), V-(7,8) |
| PoE Ports Output Voltage |
44 do 57VDC |
| DIP Switch |
Switch 1~5: Port 1~5 link down alarm Enable/Disable
Switch 6: Power fault alarm Enable/Disable. |
| Wykonanie |
|
| Klasa ochrony |
IP31 |
| Instalacja |
DIN, wieszany |
| Obudowa |
Aluminiowo-metalowa |
| Wymiary |
33.8 mm (H) x 164.8 mm(W) x 108 mm (D) |
| Waga |
0.70kg z opakowaniem
0.65kg bez opakowania |
| Środowisko pracy |
|
| Temperatura pracy |
-25°C~60°C |
| Temperatura przechowywania |
-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH |
| Wilgotność |
5% to 95% (nie skondensowana) |
| Certyfikaty i Deklaracje |
|
| EMI |
FCC Class A; CE/EN55022:2003 Class A |
| EMS |
EN61000-4-2,EN61000-4-3,EN61000-4-4,
EN61000-4-5,EN61000-4-6 |
| Bezpieczeństwo |
CE/EN60950 |
| Wstrząsy |
IEC 60068-2-27 |
| Swobodny upadek |
IEC 60068-2-32 |
| Wibracje |
IEC 60068-2-6 |
| MTBF |
324,345 Hours, MIL-HDBK-217F GB standard |
| Gwarancja |
2 lata |
| Zasilanie kamer |
| |
|
| Wymiary |
(jednostka: mm) |
| |
 |
Switche KORENIX 
.png)
Karta katalogowa
Ten adres email jest ukrywany przed spamerami, wlacz obsluge JavaScript w przegladarce, by go zobaczyc
